— Austin garage floor coating
Epoxy Flooring & Garage Floor Coatings in Austin, TX
Epoxy flooring Austin homeowners trust Austin Epoxy Co. installs epoxy and polyaspartic garage floor coatings across Austin, TX, and the surrounding Hill Country. We diamond-grind every slab, repair the cracks and oil stains underneath, and finish with UV-stable coatings engineered for Central Texas heat. Most garages are done in a single day and backed by a 15-year written warranty.
15-yr
Written warranty
1 Day
Most installs
500+
Austin floors coated
If your garage floor is dusty, stained, or peeling — or a builder-grade slab you’ve never liked — you’re in the right place. We’re a locally owned Austin crew (not a national franchise), and we do one thing well: turn rough concrete into a floor that’s easy to clean, safe to walk on, and built to last through summer after summer.
— What we install
Epoxy flooring Austin services we install
One local crew, every coating system — matched to how you actually use the space and what Texas weather throws at it.
Epoxy garage floors
Our bread and butter. Full decorative flake and solid-color epoxy systems that shrug off tires, dropped tools, and hot Austin summers. Choose your flake blend to match the house.
Metallic epoxy floors
High-gloss, marbled metallic epoxy for homeowners who want a showroom look in the garage, entryway, or retail space. No two floors come out identical.
Polyaspartic coatings
UV-stable, one-day-cure polyaspartic (a polyurea-based coating) — more flexible and more heat- and sun-resistant than standard epoxy. Our go-to topcoat for garages that bake in full sun.
Patio & pool-deck coatings
Slip-resistant decorative coatings for patios, porches, and pool surrounds that stay cooler underfoot than bare concrete — a real consideration in a Texas summer.
Commercial & warehouse floors
Chemical- and abrasion-resistant floors for Austin shops, warehouses, showrooms, and restaurants, installed with minimal downtime so you stay open.
Concrete repair & surface prep
The part nobody sees but everybody feels: diamond grinding, crack and pit repair, oil-spot remediation, and moisture testing. The difference between a floor that lasts 15 years and one that peels in two.
— Built for Texas heat
Why Austin garage floors fail and how we prevent it
Here’s the truth most companies won’t tell you: in Austin, the coating is only as good as the prep and the product, and our climate is brutal on cheap versions of both. Austin’s climate data shows summer surface temperatures regularly climb past 100°F, which is exactly the kind of heat cheap coatings aren’t built for. So what actually goes wrong on Austin garage floors?
Extreme heat & “hot tire pickup”
A closed Austin garage can push past 120°F in July. Bargain DIY epoxy softens, and hot tires literally peel the coating off. We use heat-tolerant polyaspartic topcoats rated for it.
UV yellowing
Sun through an open garage door ambers cheap epoxy within a season. UV-stable polyaspartic keeps its color for years.
Expansive clay soil
Central Texas sits on expansive “black gumbo” clay that swells and shrinks, cracking slabs across Travis, Williamson & Hays counties. We repair cracks and use coatings with enough flex to move with the slab.
Epoxy garage floors
Our bread and butter. Full decorative flake and solid-color epoxy systems that shrug off tires, dropped tools, and hot Austin summers. Choose your flake blend to match the house.
Epoxy garage floors
Our bread and butter. Full decorative flake and solid-color epoxy systems that shrug off tires, dropped tools, and hot Austin summers. Choose your flake blend to match the house.
Ask yourself: did the last quote you got mention grinding, moisture testing, or crack repair — or just a price and a color? If it was just a price and a color, that floor was built to fail.
— Why Austin homeowners choose us
The coating lasts because the prep is done right
Diamond-ground, every single time
We mechanically profile the concrete, never acid-etch or paint over a dirty slab. Proper surface profile is why our coatings bond and don’t peel.
A real 15-year written warranty
In writing, not a handshake. If it delaminates or peels, we come back and fix it.
One-day installs
Most residential garages are done in a day with our polyaspartic system: grind in the morning, park on it the next.
Upfront, honest pricing
Clear per-square-foot pricing after a free on-site look. No “sign today for this price” pressure.
Locally owned in Austin
You deal with the people doing the work, not a call center three states away.
— How it works
Your floor, done in four steps
Free on-site estimate
We measure, inspect the slab, check moisture, and hand you a written, itemized quote with no obligation.
Grind & repair
Diamond-grind the concrete to the right profile, fill cracks and pits, and remediate any oil spots.
Coat & flake
Apply the base coat, broadcast decorative flake to refusal, then seal it with a clear polyaspartic topcoat.
Cure & enjoy
Walk on it within hours, park on it the next day — protected by your 15-year warranty.
— Straight answer
How much does an epoxy garage floor cost in Austin?
Most 2-car garages in the Austin area run roughly $1,400–$6,000 installed, depending on the coating system (solid, flake, or metallic) and the condition of your slab. A basic solid-color coating sits at the low end; full flake and metallic systems with heavy crack repair sit higher.
We give you a firm, written number after a free on-site look — no guessing games.
2-car garage · installed
$1,400–$6,000
coating system (solid, flake, or metallic
— Where we work
Serving Austin & the surrounding metro
We install garage floor coatings across Austin and the surrounding metro, from the Hill Country on the west side to the eastern suburbs out near the Tesla Gigafactory in Del Valle.
Austin neighborhoods
Surrounding cities
Zip codes we cover include
78704 · 78745 · 78748 · 78749 · 78759 · 78717 (Austin) · 78660 (Pflugerville) · 78681 (Round Rock) · 78613 (Cedar Park) · 78641 (Leander) · 78626 (Georgetown) · 78620 (Dripping Springs) · 78738 (Bee Cave/Lakeway) · 78610 (Buda) · 78640 (Kyle)
Don’t see your area? Just ask if you’re in Central Texas; chances are we can help.
— What Austin says
Rated 5.0 across 180+ reviews
Placeholder — replace with 3 real Google reviews (name + neighborhood).
“Crew ground the whole slab and were done in a day. Two summers later, zero peeling and it still looks brand new. Worth every penny.”
Jordan M.
Cedar Park, TX
“Got three quotes. These guys were the only ones who explained the prep and put the warranty in writing. Easy choice.”
Sara P.
Round Rock, TX
“The metallic finish in our garage looks like a showroom. Neighbors keep asking who did it. Highly recommend.”
Derek R.
Austin, 78745
— Good to know
Epoxy flooring Austin FAQs
How much does an epoxy garage floor cost in Austin?
Most Austin 2-car garages run $1,400–$6,000 installed, depending on the system and slab condition. Solid-color coatings are cheapest; full flake and metallic systems cost more. We give a firm written quote after a free on-site look.
Will an epoxy floor hold up to Texas heat?
Yes if the right system is used. Standard bargain epoxy can soften and suffer hot-tire pickup in a hot Austin garage. We finish with heat- and UV-stable polyaspartic topcoats built to handle Central Texas summers without softening or yellowing.
What’s the difference between epoxy and polyaspartic?
Epoxy is a rigid, budget-friendly base coat; polyaspartic is a flexible, UV-stable, faster-curing topcoat. Polyaspartic resists heat and sun better ideal for Austin. Most of our floors use epoxy or a base coat sealed with a polyaspartic topcoat for the best of both.
How long does the installation take?
Most residential garages are finished in one day with our polyaspartic system. You can usually walk on the floor the same evening and park a vehicle on it the next day.
Will my garage floor be slippery when wet?
It doesn’t have to be. We broadcast decorative flake for texture and can add an anti-slip additive to the topcoat, giving you traction even when the floor is wet.
Do you coat brand-new construction slabs?
Yes, but new slabs need to cure first. In newer Austin suburbs like Leander, Georgetown, Buda, and Kyle, we check the slab’s age and moisture-test it before coating so your new floor doesn’t fail early.
How long does an epoxy garage floor last?
A properly prepped, professionally installed floor lasts 10–20 years. Ours is backed by a 15-year written warranty against peeling and delamination a DIY kit typically lasts only 1–3 years by comparison.
What areas around Austin do you serve?
We cover Austin and the surrounding metro, including Round Rock, Cedar Park, Leander, Georgetown, Pflugerville, Buda, Kyle, Lakeway, and Bee Cave across Travis, Williamson, and Hays counties.
— Good to know
Austin epoxy garage floor FAQs
Tell us about your space, and we’ll send a firm, no-pressure estimate usually within one business day.